Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Gloucester Point?
Garage door service in Gloucester Point typically runs $150 – $600 for most repair jobs, with a new door installation ranging from $700 – $2,200. Spring repair, the most common single job we see, is usually $180 – $340 for one spring. Those are typical estimates for this area, and the written estimate we give you sets the final price.
We work on the brand already on your door, not the one we prefer to sell. Our technicians are trained to service eight of the industry’s most widely installed door and opener brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That means you rarely need a brand-specific specialist elsewhere. Call (833) 508-9227 to get a free estimate.
- Most repair visits: $150 – $600
- Spring repair (one spring): $180 – $340
- Opener repair: $120 – $320
- New door installation: $700 – $2,200
- Free estimates, written price set per job
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down by job type for the Gloucester Point market. These are estimated ranges, not quotes; the written estimate you receive after we look at your door is what you’ll actually pay.
| Job | Typical Estimated Range | What It Covers |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Diagnosis and fix of most single-failure problems |
| Spring repair (one spring) | $180 – $340 | Replacement of a single torsion or extension spring |
| Cable repair | $130 – $250 | Replacing frayed or snapped lift cables |
| Opener repair | $120 – $320 | Fixing motors, gears, sensors, remotes and boards |
| Opener installation | $250 – $550 | Supplying and fitting a new opener unit |
| Panel replacement | $250 – $500 | Swapping one damaged section |
| Track realignment | $120 – $240 | Straightening bent or knocked-out track |
| Roller replacement | $110 – $220 | New rollers to cut noise and binding |
| New door installation | $700 – $2,200 | New door and hardware, fitted |
Those ranges swing depending on what actually fails. Spring repair is a good example: a single spring sits in the $180 – $340 band, but a matched pair is almost always replaced together, so a pair costs about twice that. Opener jobs vary with whether it’s a sensor out of line or a motor that’s finished. Panel jobs depend on whether the section is a standard size or something specific to your door’s model.
New door installation is the widest range because the door itself carries most of the cost. A single-car door with basic hardware lands near the lower end; a double door with heavier insulation and upgraded hardware climbs toward the top. We work on the full lifecycle here, from new installation to opener retrofit, so a single call covers whatever stage your door is at.
What Affects Garage Door Pricing in Gloucester Point
Every job is priced on its own, but a few things consistently move the number up or down in this area.
- Which spring you have. Torsion springs and extension springs are different jobs with different parts. A matched pair costs about twice a single spring, and we’ll tell you upfront whether your door needs one or both.
- Door type and size. Single-car doors, double-car doors and custom sizes all price differently. Panel replacement in particular depends on matching your door’s specific section profile.
- Opener age and brand. Older units with discontinued parts can cost more to repair than to replace. That’s where brand-agnostic guidance matters: we recommend based on your door and situation, not a manufacturer relationship.
- Access and clearance. A door that’s been knocked off its track or is jammed shut can take more time to safely stabilize before the actual repair begins.
- What else the inspection finds. A failed roller is cheap on its own, but if the same door has a worn cable or a bent track, bundling the work into one visit saves you a second appointment.
- Whether the door can be salvaged. Panel and track damage is often fixable for far less than a replacement. Structural failure or a door at the end of its service life points the other way.
Our technicians have up to 11 years of experience, and we only handle garage doors. Your garage door is your home’s largest moving part, and we treat it that way. If you’re in Gloucester Point and your door won’t move, we move fast. For a broader look at our service, see Newport News Garage Door Repair Pros.
How to Save on Garage Door
The single biggest saver is catching a small problem before it becomes a big one. A roller replacement at $110 – $220 now can prevent worn tracks and a strained opener later. Beyond that:
- Get a free estimate first. Estimates are free and every price is set per job by the written estimate, so you know the number before the work starts. Call (833) 508-9227.
- Ask whether repair or replacement is cheaper. For panels, tracks and rollers, repair almost always wins. Ask for the comparison in writing.
- Fix the cause, not the symptom. A door that keeps going out of alignment usually has a worn roller or a loose track. Fixing the source once beats repeat service calls.
- Bundle related jobs in one visit. If a single trip reveals a cable and a roller both worn, handling both at once saves you an appointment.
- Don’t force a stuck door. A jammed door with a broken spring should never be operated by hand, and forcing it can turn a $180 – $340 spring job into a much larger repair.
One safety note that matters for pricing: garage door springs and cables are under extreme tension and are genuinely dangerous to handle. We recommend a trained professional for spring and cable work. That’s why we offer spring repair as a dedicated service, a high-risk repair most general handymen decline. Don’t attempt to adjust, cut or unwind a spring yourself.
FAQs – Garage Door Cost
How much does garage door repair cost in Gloucester Point?
Most garage door repairs in Gloucester Point run $150 – $600, with the exact price depending on what failed. Spring and opener jobs make up a large share of that range. Call (833) 508-9227 for an exact quote, estimates are free.
How much does spring repair cost in Gloucester Point?
Spring repair is typically $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that range. Call (833) 508-9227 to book a free estimate.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper for panels, tracks, rollers and opener fixes, often staying under $500, while a full new door installation runs $700 – $2,200. Replacement makes more sense when the door is structurally failing or needs repeated repairs. Call (833) 508-9227 and we’ll give you a straight comparison in writing.
How much does a new garage door cost in Gloucester Point?
New door installation in Gloucester Point runs $700 – $2,200, depending on door size, insulation and hardware. We install and then service the same door, so there’s no handoff to a second contractor. Call (833) 508-9227 to schedule a free estimate.
Can you come today?
Same-day service is available, and emergency garage door service is a core offering here, not an upsell. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 508-9227.
Do you charge for estimates?
No, estimates are free. The price is set per job by the written estimate, and the range you’re quoted is a typical estimate, not a fixed fee. Call (833) 508-9227 to get yours.
Pricing reflects the Gloucester Point market as of 2026. Newport News Garage Door Repair Pros offers free estimates. Call (833) 508-9227.
Written by the team at Newport News Garage Door Repair Pros.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Paige Schaefer"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Tyrone Nash"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Maurice Carter